qml.QuantumMonteCarlo¶

class
QuantumMonteCarlo
(probs, func, target_wires, estimation_wires, do_queue=True, id=None)[source]¶ Bases:
pennylane.operation.Operation
Performs the quantum Monte Carlo estimation algorithm.
Given a probability distribution \(p(i)\) of dimension \(M = 2^{m}\) for some \(m \geq 1\) and a function \(f: X \rightarrow [0, 1]\) defined on the set of integers \(X = \{0, 1, \ldots, M  1\}\), this function implements the algorithm that allows the following expectation value to be estimated:
\[\mu = \sum_{i \in X} p(i) f(i).\]The algorithm proceeds as follows:
The probability distribution \(p(i)\) is encoded using a unitary \(\mathcal{A}\) applied to the first \(m\) qubits specified by
target_wires
.The function \(f(i)\) is encoded onto the last qubit of
target_wires
using a unitary \(\mathcal{R}\).The unitary \(\mathcal{Q}\) is defined with eigenvalues \(e^{\pm 2 \pi i \theta}\) such that the phase \(\theta\) encodes the expectation value through the equation \(\mu = (1 + \cos (\pi \theta)) / 2\). The circuit in steps 1 and 2 prepares an equal superposition over the two states corresponding to the eigenvalues \(e^{\pm 2 \pi i \theta}\).
The
QuantumPhaseEstimation()
circuit is applied so that \(\pm\theta\) can be estimated by finding the probabilities of the \(n\) estimation wires. This in turn allows for the estimation of \(\mu\).
Visit Rebentrost et al. (2018) for further details. In this algorithm, the number of applications \(N\) of the \(\mathcal{Q}\) unitary scales as \(2^{n}\). However, due to the use of quantum phase estimation, the error \(\epsilon\) scales as \(\mathcal{O}(2^{n})\). Hence,
\[N = \mathcal{O}\left(\frac{1}{\epsilon}\right).\]This scaling can be compared to standard Monte Carlo estimation, where \(N\) samples are generated from the probability distribution and the average over \(f\) is taken. In that case,
\[N = \mathcal{O}\left(\frac{1}{\epsilon^{2}}\right).\]Hence, the quantum Monte Carlo algorithm has a quadratically improved time complexity with \(N\).
 Parameters
probs (array) – input probability distribution as a flat array
func (callable) – input function \(f\) defined on the set of integers \(X = \{0, 1, \ldots, M  1\}\) such that \(f(i)\in [0, 1]\) for \(i \in X\)
target_wires (Union[Wires, Sequence[int], or int]) – the target wires
estimation_wires (Union[Wires, Sequence[int], or int]) – the estimation wires
 Raises
ValueError – if
probs
is not flat or has a length that is not compatible withtarget_wires
Note
This template is only compatible with simulators because the algorithm is performed using unitary matrices. Additionally, this operation is not differentiable. To implement the quantum Monte Carlo algorithm on hardware requires breaking down the unitary matrices into hardwarecompatible gates, check out the
quantum_monte_carlo()
transformation for more details.Usage Details
Consider a standard normal distribution \(p(x)\) and a function \(f(x) = \sin ^{2} (x)\). The expectation value of \(f(x)\) is \(\int_{\infty}^{\infty}f(x)p(x) \approx 0.432332\). This number can be approximated by discretizing the problem and using the quantum Monte Carlo algorithm.
First, the problem is discretized:
from scipy.stats import norm m = 5 M = 2 ** m xmax = np.pi # bound to region [pi, pi] xs = np.linspace(xmax, xmax, M) probs = np.array([norm().pdf(x) for x in xs]) probs /= np.sum(probs) func = lambda i: np.sin(xs[i]) ** 2
The
QuantumMonteCarlo
template can then be used:n = 10 N = 2 ** n target_wires = range(m + 1) estimation_wires = range(m + 1, n + m + 1) dev = qml.device("default.qubit", wires=(n + m + 1)) @qml.qnode(dev) def circuit(): qml.templates.QuantumMonteCarlo( probs, func, target_wires=target_wires, estimation_wires=estimation_wires, ) return qml.probs(estimation_wires) phase_estimated = np.argmax(circuit()[:int(N / 2)]) / N
The estimated value can be retrieved using the formula \(\mu = (1\cos(\pi \theta))/2\)
>>> (1  np.cos(np.pi * phase_estimated)) / 2 0.4327096457464369
Attributes
Arithmetic depth of the operator.
Holdover from when inplace inversion changed then name.
The basis of an operation, or for controlled gates, of the target operation.
Batch size of the operator if it is used with broadcasted parameters.
Control wires of the operator.
Gradient recipe for the parametershift method.
Integer hash that uniquely represents the operator.
Dictionary of nontrainable variables that this operation depends on.
Custom string to label a specific operator instance.
This property determines if an operator is hermitian.
String for the name of the operator.
Number of dimensions per trainable parameter of the operator.
Number of trainable parameters that the operator depends on.
Returns the frequencies for each operator parameter with respect to an expectation value of the form \(\langle \psi  U(\mathbf{p})^\dagger \hat{O} U(\mathbf{p})\psi\rangle\).
Trainable parameters that the operator depends on.
Wires that the operator acts on.

arithmetic_depth
¶ Arithmetic depth of the operator.

base_name
¶ Holdover from when inplace inversion changed then name. To be removed.

basis
= None¶ The basis of an operation, or for controlled gates, of the target operation. If not
None
, should take a value of"X"
,"Y"
, or"Z"
.For example,
X
andCNOT
havebasis = "X"
, whereasControlledPhaseShift
andRZ
havebasis = "Z"
. Type
str or None

batch_size
¶ Batch size of the operator if it is used with broadcasted parameters.
The
batch_size
is determined based onndim_params
and the provided parameters for the operator. If (some of) the latter have an additional dimension, and this dimension has the same size for all parameters, its size is the batch size of the operator. If no parameter has an additional dimension, the batch size isNone
. Returns
Size of the parameter broadcasting dimension if present, else
None
. Return type
int or None

control_wires
¶ Control wires of the operator.
For operations that are not controlled, this is an empty
Wires
object of length0
. Returns
The control wires of the operation.
 Return type

grad_method
= None¶

grad_recipe
= None¶ Gradient recipe for the parametershift method.
This is a tuple with one nested list per operation parameter. For parameter \(\phi_k\), the nested list contains elements of the form \([c_i, a_i, s_i]\) where \(i\) is the index of the term, resulting in a gradient recipe of
\[\frac{\partial}{\partial\phi_k}f = \sum_{i} c_i f(a_i \phi_k + s_i).\]If
None
, the default gradient recipe containing the two terms \([c_0, a_0, s_0]=[1/2, 1, \pi/2]\) and \([c_1, a_1, s_1]=[1/2, 1, \pi/2]\) is assumed for every parameter. Type
tuple(Union(list[list[float]], None)) or None

has_adjoint
= False¶

has_decomposition
= True¶

has_diagonalizing_gates
= False¶

has_generator
= False¶

has_matrix
= False¶

hash
¶ Integer hash that uniquely represents the operator.
 Type
int

hyperparameters
¶ Dictionary of nontrainable variables that this operation depends on.
 Type
dict

id
¶ Custom string to label a specific operator instance.

is_hermitian
¶ This property determines if an operator is hermitian.

name
¶ String for the name of the operator.

ndim_params
¶ Number of dimensions per trainable parameter of the operator.
By default, this property returns the numbers of dimensions of the parameters used for the operator creation. If the parameter sizes for an operator subclass are fixed, this property can be overwritten to return the fixed value.
 Returns
Number of dimensions for each trainable parameter.
 Return type
tuple

num_params
¶

num_wires
= 1¶

parameter_frequencies
¶ Returns the frequencies for each operator parameter with respect to an expectation value of the form \(\langle \psi  U(\mathbf{p})^\dagger \hat{O} U(\mathbf{p})\psi\rangle\).
These frequencies encode the behaviour of the operator \(U(\mathbf{p})\) on the value of the expectation value as the parameters are modified. For more details, please see the
pennylane.fourier
module. Returns
Tuple of frequencies for each parameter. Note that only nonnegative frequency values are returned.
 Return type
list[tuple[int or float]]
Example
>>> op = qml.CRot(0.4, 0.1, 0.3, wires=[0, 1]) >>> op.parameter_frequencies [(0.5, 1), (0.5, 1), (0.5, 1)]
For operators that define a generator, the parameter frequencies are directly related to the eigenvalues of the generator:
>>> op = qml.ControlledPhaseShift(0.1, wires=[0, 1]) >>> op.parameter_frequencies [(1,)] >>> gen = qml.generator(op, format="observable") >>> gen_eigvals = qml.eigvals(gen) >>> qml.gradients.eigvals_to_frequencies(tuple(gen_eigvals)) (1.0,)
For more details on this relationship, see
eigvals_to_frequencies()
.

parameters
¶ Trainable parameters that the operator depends on.
Methods
adjoint
()Create an operation that is the adjoint of this one.
compute_decomposition
(A, R, Q, wires, …)Representation of the operator as a product of other operators.
compute_diagonalizing_gates
(*params, wires, …)Sequence of gates that diagonalize the operator in the computational basis (static method).
compute_eigvals
(*params, **hyperparams)Eigenvalues of the operator in the computational basis (static method).
compute_matrix
(*params, **hyperparams)Representation of the operator as a canonical matrix in the computational basis (static method).
compute_sparse_matrix
(*params, **hyperparams)Representation of the operator as a sparse matrix in the computational basis (static method).
Representation of the operator as a product of other operators.
Sequence of gates that diagonalize the operator in the computational basis.
eigvals
()Eigenvalues of the operator in the computational basis.
expand
()Returns a tape that has recorded the decomposition of the operator.
Generator of an operator that is in singleparameterform.
label
([decimals, base_label, cache])A customizable string representation of the operator.
map_wires
(wire_map)Returns a copy of the current operator with its wires changed according to the given wire map.
matrix
([wire_order])Representation of the operator as a matrix in the computational basis.
pow
(z)A list of new operators equal to this one raised to the given power.
queue
([context])Append the operator to the Operator queue.
simplify
()Reduce the depth of nested operators to the minimum.
The parameters required to implement a singlequbit gate as an equivalent
Rot
gate, up to a global phase.sparse_matrix
([wire_order])Representation of the operator as a sparse matrix in the computational basis.
terms
()Representation of the operator as a linear combination of other operators.
validate_subspace
(subspace)Validate the subspace for qutrit operations.

adjoint
()¶ Create an operation that is the adjoint of this one.
Adjointed operations are the conjugated and transposed version of the original operation. Adjointed ops are equivalent to the inverted operation for unitary gates.
 Returns
The adjointed operation.

static
compute_decomposition
(A, R, Q, wires, estimation_wires, target_wires)[source]¶ Representation of the operator as a product of other operators.
\[O = O_1 O_2 \dots O_n.\]See also
 Parameters
A (array) – unitary matrix corresponding to an input probability distribution
R (array) – unitary that encodes the function applied to the ancilla qubit register
Q (array) – matrix that encodes the expectation value according to the probability unitary and the functionencoding unitary
wires (Any or Iterable[Any]) – full set of wires that the operator acts on
target_wires (Iterable[Any]) – the target wires
estimation_wires (Iterable[Any]) – the estimation wires
 Returns
decomposition of the operator
 Return type
list[Operator]

static
compute_diagonalizing_gates
(*params, wires, **hyperparams)¶ Sequence of gates that diagonalize the operator in the computational basis (static method).
Given the eigendecomposition \(O = U \Sigma U^{\dagger}\) where \(\Sigma\) is a diagonal matrix containing the eigenvalues, the sequence of diagonalizing gates implements the unitary \(U^{\dagger}\).
The diagonalizing gates rotate the state into the eigenbasis of the operator.
See also
 Parameters
params (list) – trainable parameters of the operator, as stored in the
parameters
attributewires (Iterable[Any], Wires) – wires that the operator acts on
hyperparams (dict) – nontrainable hyperparameters of the operator, as stored in the
hyperparameters
attribute
 Returns
list of diagonalizing gates
 Return type
list[Operator]

static
compute_eigvals
(*params, **hyperparams)¶ Eigenvalues of the operator in the computational basis (static method).
If
diagonalizing_gates
are specified and implement a unitary \(U^{\dagger}\), the operator can be reconstructed as\[O = U \Sigma U^{\dagger},\]where \(\Sigma\) is the diagonal matrix containing the eigenvalues.
Otherwise, no particular order for the eigenvalues is guaranteed.
 Parameters
params (list) – trainable parameters of the operator, as stored in the
parameters
attributehyperparams (dict) – nontrainable hyperparameters of the operator, as stored in the
hyperparameters
attribute
 Returns
eigenvalues
 Return type
tensor_like

static
compute_matrix
(*params, **hyperparams)¶ Representation of the operator as a canonical matrix in the computational basis (static method).
The canonical matrix is the textbook matrix representation that does not consider wires. Implicitly, this assumes that the wires of the operator correspond to the global wire order.
 Parameters
params (list) – trainable parameters of the operator, as stored in the
parameters
attributehyperparams (dict) – nontrainable hyperparameters of the operator, as stored in the
hyperparameters
attribute
 Returns
matrix representation
 Return type
tensor_like

static
compute_sparse_matrix
(*params, **hyperparams)¶ Representation of the operator as a sparse matrix in the computational basis (static method).
The canonical matrix is the textbook matrix representation that does not consider wires. Implicitly, this assumes that the wires of the operator correspond to the global wire order.
See also
 Parameters
params (list) – trainable parameters of the operator, as stored in the
parameters
attributehyperparams (dict) – nontrainable hyperparameters of the operator, as stored in the
hyperparameters
attribute
 Returns
sparse matrix representation
 Return type
scipy.sparse._csr.csr_matrix

decomposition
()¶ Representation of the operator as a product of other operators.
\[O = O_1 O_2 \dots O_n\]A
DecompositionUndefinedError
is raised if no representation by decomposition is defined.See also
 Returns
decomposition of the operator
 Return type
list[Operator]

diagonalizing_gates
()¶ Sequence of gates that diagonalize the operator in the computational basis.
Given the eigendecomposition \(O = U \Sigma U^{\dagger}\) where \(\Sigma\) is a diagonal matrix containing the eigenvalues, the sequence of diagonalizing gates implements the unitary \(U^{\dagger}\).
The diagonalizing gates rotate the state into the eigenbasis of the operator.
A
DiagGatesUndefinedError
is raised if no representation by decomposition is defined.See also
 Returns
a list of operators
 Return type
list[Operator] or None

eigvals
()¶ Eigenvalues of the operator in the computational basis.
If
diagonalizing_gates
are specified and implement a unitary \(U^{\dagger}\), the operator can be reconstructed as\[O = U \Sigma U^{\dagger},\]where \(\Sigma\) is the diagonal matrix containing the eigenvalues.
Otherwise, no particular order for the eigenvalues is guaranteed.
Note
When eigenvalues are not explicitly defined, they are computed automatically from the matrix representation. Currently, this computation is not differentiable.
A
EigvalsUndefinedError
is raised if the eigenvalues have not been defined and cannot be inferred from the matrix representation.See also
 Returns
eigenvalues
 Return type
tensor_like

expand
()¶ Returns a tape that has recorded the decomposition of the operator.
 Returns
quantum tape
 Return type

generator
()¶ Generator of an operator that is in singleparameterform.
For example, for operator
\[U(\phi) = e^{i\phi (0.5 Y + Z\otimes X)}\]we get the generator
>>> U.generator() (0.5) [Y0] + (1.0) [Z0 X1]
The generator may also be provided in the form of a dense or sparse Hamiltonian (using
Hermitian
andSparseHamiltonian
respectively).The default value to return is
None
, indicating that the operation has no defined generator.

label
(decimals=None, base_label=None, cache=None)¶ A customizable string representation of the operator.
 Parameters
decimals=None (int) – If
None
, no parameters are included. Else, specifies how to round the parameters.base_label=None (str) – overwrite the nonparameter component of the label
cache=None (dict) – dictionary that carries information between label calls in the same drawing
 Returns
label to use in drawings
 Return type
str
Example:
>>> op = qml.RX(1.23456, wires=0) >>> op.label() "RX" >>> op.label(decimals=2) "RX\n(1.23)" >>> op.label(base_label="my_label") "my_label" >>> op.label(decimals=2, base_label="my_label") "my_label\n(1.23)"
If the operation has a matrixvalued parameter and a cache dictionary is provided, unique matrices will be cached in the
'matrices'
key list. The label will contain the index of the matrix in the'matrices'
list.>>> op2 = qml.QubitUnitary(np.eye(2), wires=0) >>> cache = {'matrices': []} >>> op2.label(cache=cache) 'U(M0)' >>> cache['matrices'] [tensor([[1., 0.], [0., 1.]], requires_grad=True)] >>> op3 = qml.QubitUnitary(np.eye(4), wires=(0,1)) >>> op3.label(cache=cache) 'U(M1)' >>> cache['matrices'] [tensor([[1., 0.], [0., 1.]], requires_grad=True), tensor([[1., 0., 0., 0.], [0., 1., 0., 0.], [0., 0., 1., 0.], [0., 0., 0., 1.]], requires_grad=True)]

map_wires
(wire_map)¶ Returns a copy of the current operator with its wires changed according to the given wire map.
 Parameters
wire_map (dict) – dictionary containing the old wires as keys and the new wires as values
 Returns
new operator
 Return type

matrix
(wire_order=None)¶ Representation of the operator as a matrix in the computational basis.
If
wire_order
is provided, the numerical representation considers the position of the operator’s wires in the global wire order. Otherwise, the wire order defaults to the operator’s wires.If the matrix depends on trainable parameters, the result will be cast in the same autodifferentiation framework as the parameters.
A
MatrixUndefinedError
is raised if the matrix representation has not been defined.See also
 Parameters
wire_order (Iterable) – global wire order, must contain all wire labels from the operator’s wires
 Returns
matrix representation
 Return type
tensor_like

pow
(z)¶ A list of new operators equal to this one raised to the given power.
 Parameters
z (float) – exponent for the operator
 Returns
list[
Operator
]

queue
(context=<class 'pennylane.queuing.QueuingManager'>)¶ Append the operator to the Operator queue.

simplify
()¶ Reduce the depth of nested operators to the minimum.
 Returns
simplified operator
 Return type

single_qubit_rot_angles
()¶ The parameters required to implement a singlequbit gate as an equivalent
Rot
gate, up to a global phase. Returns
A list of values \([\phi, \theta, \omega]\) such that \(RZ(\omega) RY(\theta) RZ(\phi)\) is equivalent to the original operation.
 Return type
tuple[float, float, float]

sparse_matrix
(wire_order=None)¶ Representation of the operator as a sparse matrix in the computational basis.
If
wire_order
is provided, the numerical representation considers the position of the operator’s wires in the global wire order. Otherwise, the wire order defaults to the operator’s wires.A
SparseMatrixUndefinedError
is raised if the sparse matrix representation has not been defined.See also
 Parameters
wire_order (Iterable) – global wire order, must contain all wire labels from the operator’s wires
 Returns
sparse matrix representation
 Return type
scipy.sparse._csr.csr_matrix

terms
()¶ Representation of the operator as a linear combination of other operators.
\[O = \sum_i c_i O_i\]A
TermsUndefinedError
is raised if no representation by terms is defined. Returns
list of coefficients \(c_i\) and list of operations \(O_i\)
 Return type
tuple[list[tensor_like or float], list[Operation]]

static
validate_subspace
(subspace)¶ Validate the subspace for qutrit operations.
This method determines whether a given subspace for qutrit operations is defined correctly or not. If not, a ValueError is thrown.
 Parameters
subspace (tuple[int]) – Subspace to check for correctness